The rigging of a kind of rigging, such as open flower orchid and so on, can be done with the spraying method of twist strands if the surface is oiled, the open flower orchid factory is sometimes used for dip coating later. It means that the spray is used to pressurize the heated oil and send it to the connection of the rope so that the oil will flow into the twist cone, and the oil is filled with every gap between various parts. The spray equipment can be prepared separately. Spray method has many advantages, for example, the oil is evenly distributed, and the quality of oiled oil is also good. The core of the application method is to oil the surface of the steel wire, then set up an oil tank in the right place, and then press the oil in the oil into the oil. Oil can also be carried out by pouring the oil on the surface of the parts. But in the actual production process, the turnbuckle factory believes that the use of this method of oil coating is easy to produce leakage, and the quality is not satisfactory, because the oil can only be coated on the surface, the inner layer has no way to apply, so the service life of the open flower orchid is very short.
Related Posts
Cautions for safe use of sling China JBY Supply
1. Safety precautions for sling loads: The weight of the lifting object shall not exceed the limit working load of the sling. Before use, visual inspection shall be carried out on the used sling, and its limit working load shall be checked according to the... read more
Differences between the sling and the rigging China JBY Supply
Generally speaking, the sling equipment includes both sling and rigging, so what are the specific differences between sling and rigging? First of all, we can see from the definition, sling, which refers to the rigidly lifting device for lifting... read more
The use and technical requirements of the hook China JBY Supply
1, the acquisition hook should be used by the technical documents of the manufacturer’s certificate and other technical documents; the important department procurement hook, such as the railway, the port and so on, the hook out of the factory must be strictly inspected (inspection). ... read more
How to use the Turnbuckle China JBY Supply
Turnbuckle is also known as a rigging, refers to the two ends of the right and left-handed thread to adjust the length of the connection of the connector fittings. If you don’t work hard, you can only inherit one of the trillions of OC-type... read more
Outstanding Performance and Characteristics of Turnbuckle China JBY Supply
Turnbuckles is mainly used for tightening or adjusting tension. It can be used for chain, steel rope and steel support. Make sure that at least 25% of the screw length has entered the main body of the basket screw. When using turnbuckles, we must strictly... read more
The difference between the nominal size and the actual size of a hoist China JBY Supply
The customer in the hoisting gear (such as the hoisting belt) will be elongated in the use process, so its size is not the same, there are two statements between the nominal size and the actual size, so it is easy to cause conceptual... read more
China Rigging Manufacturer Supplier
Our company is vigorously promoting brand, high quality and low price. All kinds of products are uploading to the web. If you need the goods not found on our website, please leave a message for me. Give me a chance to give you a... read more
Regular inspection of wire rope China JBY Supply
During the use of wire ropes, regular inspections must be carried out according to the regulations, and the inspection results shall be carefully recorded. By monitoring the wire rope at any time, it provides a basis for safe and reasonable use of wire rope.... read more
Company news
The company is promoting the brand,product price preference and quality assurance of brand products .Welcome to consult,look forward to working with you . read more
The standard of discarding the hook China JBY Supply
Criteria for scrapping hooks: The hooks should be inspected regularly. If one of the following conditions is found, the hooks must be scrapped and replaced. 1. When the surface has cracks and cracks, the opening is increased by 15%... read more