In order to ensure the safety and reliability of the object in the process of hoisting, the binding method should be selected according to the weight, shape feature, installation requirement and hoisting method of the object before lifting. There are two main methods: (1) the parallel hoisting and binding method, using a hanging point, to find the center of gravity of the object before the binding, so as to make the center of gravity of the object before lashing. The object is in a horizontal state. The other way is to use two lifting points. This method is tied to two ends of the body, often using double limb wear method and hanging basket type cable method. (2) the vertical slanting hoisting and lashing method is used for a long time and has special requirements for the installation of the object. The binding point is more than one point, and the binding position is at the top of the object.
Related Posts
Marking method for the characteristics of steel wire rope China JBY Supply
The diameter of the wire rope is 18mm, the steel wire (no plating), 6 strand of natural fiber core, right twist twist , the tensile strength of the steel wire is 1770MPa, the minimum breaking tension of the steel wire is 176kN, and the... read more
Use and precautions of eye hoist hook China JBY Supply
The eye hoist hook should pay attention to the environmental conditions when it is used in conjunction with the rigging, and the rigging should not be twisted and knotted. During the lifting process of the hook, the articles that are strictly forbidden to be... read more
Operation management of hoisting machinery China JBY Supply
1. management of operators Operators should learn and master the relevant knowledge of the structure, working principle, technical performance, safety operating procedures, maintenance and maintenance system of the hoisting machinery used and the relevant national laws, regulations and standards before they go on duty. After... read more
Performance characteristics and maintenance of die forging shackles China JBY Supply
Performance characteristics of die forging Shackles: 1. The unloading body is forged by high-quality carbon structure or alloy structure and stops heat treatment. It has small volume and high strength. 2. The experimental load of the shackle is 2 times the limit working load, and the... read more
Use and attention of eye hoist hooks China JBY Supply
The Eye hoist hook should pay attention to the environmental conditions when it is used in conjunction with the rigging, and the rigging should not be twisted and used jointly. During lifting, hooks are not allowed to be subjected to collision and impact. At present,... read more
Application and characteristics of wire rope clips China JBY Supply
The wire rope clamp is mainly used for temporary connection of the wire rope, the fixing of the back hand rope when the wire rope goes through the trolley set and the fixing of the wind rope head of the rope on the pick... read more
Turnbuckle common maintenance China JBY Supply
The rigging of a kind of rigging, such as open flower orchid and so on, can be done with the spraying method of twist strands if the surface is oiled, the open flower orchid factory is sometimes used for dip coating later. It means that... read more
How to use the Turnbuckle China JBY Supply
Turnbuckle is also known as a rigging, refers to the two ends of the right and left-handed thread to adjust the length of the connection of the connector fittings. If you don’t work hard, you can only inherit one of the trillions of OC-type... read more
Cautions for safe use of sling China JBY Supply
1. Safety precautions for sling loads: The weight of the lifting object shall not exceed the limit working load of the sling. Before use, visual inspection shall be carried out on the used sling, and its limit working load shall be checked according to the... read more
Company news
The company is promoting the brand,product price preference and quality assurance of brand products .Welcome to consult,look forward to working with you . read more