US Fed. Specification Hook And Eye Turnbuckle China JBY Supply

US Fed. Specification Hook And Eye Turnbuckle China JBY Supply

JBY is one of the largest rigging manufacturers and suppliers in China.China JBY Supply US Fed. Specification Hook & Eye Turnbuckle is  a high quality and low price products.Galvanized Hook & Eye Turnbuckle is recommended for straight or inline pulls, commonly used for adjusting the tension or length of wire ropes, aircraft cables, tie rods, and other tensioning systems. It normally have two threaded hooks, jaws, eyelets, or combination of any two of them, one screwed into each end of a metal frame, one with a left-hand thread and the other with a right-hand thread. The tension can be adjusted by rotating the frame, which causes both ends to be screwed in or out simultaneously, without twisting the end fittings (hooks, clevis and eyes) or attached rope or cables. You might also like: US Fed.Specification Turnbuckle Hook & Hook;  US Fed.Specification Turnbuckle Jaw & Eye.



  • Proof Load is 2.5 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit.
  • Meets specification FF-T-791b, Type 1, Form 1
  • End fittings are Quenched and Tempered, bodies鈥?heat treated by normalizing.
  • Hooks and eyes are forged with a greater cross sectional area that results in a stronger hook or eye with better fatigue properties.
  • Modified UNJ thread on end fittings for improved fatigue properties.
  • Body has UNC threads.

  • Description
  • Inquiry

REMEMBER: CHINA JBY SUPPLY ANY PRODUCT WILL BREAK IF ABUSED, MISUSED, OVERUSED OR NOT MAINTAINED PROPERLY. Such breaks can cause loads to fall or swing out of control, possibly resulting in serious injury or death as well as major property damage.




Part No.Thread Dia &  Take UpWorking load limitedWeight EachDimensions(in)BB
 (lbs) (lbs)ClosedOpenClosedOpenClosedClosed

Contact Us