The rigging of a kind of rigging, such as open flower orchid and so on, can be done with the spraying method of twist strands if the surface is oiled, the open flower orchid factory is sometimes used for dip coating later. It means that the spray is used to pressurize the heated oil and send it to the connection of the rope so that the oil will flow into the twist cone, and the oil is filled with every gap between various parts. The spray equipment can be prepared separately. Spray method has many advantages, for example, the oil is evenly distributed, and the quality of oiled oil is also good. The core of the application method is to oil the surface of the steel wire, then set up an oil tank in the right place, and then press the oil in the oil into the oil. Oil can also be carried out by pouring the oil on the surface of the parts. But in the actual production process, the turnbuckle factory believes that the use of this method of oil coating is easy to produce leakage, and the quality is not satisfactory, because the oil can only be coated on the surface, the inner layer has no way to apply, so the service life of the open flower orchid is very short.
Related Posts
Marking method for the characteristics of steel wire rope China JBY Supply
The diameter of the wire rope is 18mm, the steel wire (no plating), 6 strand of natural fiber core, right twist twist , the tensile strength of the steel wire is 1770MPa, the minimum breaking tension of the steel wire is 176kN, and the... read more
Rigging rust prevention China JBY Supply
Metal corrosion is a spontaneous process of metal transformation from high potential energy unit to compound. Sling gear is a hardware and mechanical tool. Without effective protective measures, corrosion will be inevitable. Therefore, the sling will face the problem of anti-rust in the process... read more
General Requirements For Shackle China JBY Supply
1. Shackle should be smooth, cracks and other defects are not allowed, sharp edges, combustion. 2. Cast iron or cast iron shackles prohibited. The buckle can be made of steel forgings and axle pin bars processed after forging. 3. No drilling or welding repair . Permanent... read more
Crane hook grade and material requirements China JBY Supply
The grade of the hook depends on the mechanical properties of the finished hook. The rated lifting weight and grade are defined by the rated lifting weight and test load, which are expressed by the letters M, P, S and T respectively. The basic design... read more
Knowledges of the Use and Maintenance of Riggings China JBY Supply
Keep rigging properly during hoisting Protect rigging when lifting rigging. The rigging should be kept away from the edges of sharp objects, avoid dragging friction leading to wear, avoid grabbing and high-load operation, and take appropriate protective measures when necessary. ... read more
Cautions for safe use of sling China JBY Supply
1. Safety precautions for sling loads: The weight of the lifting object shall not exceed the limit working load of the sling. Before use, visual inspection shall be carried out on the used sling, and its limit working load shall be checked according to the... read more
Precautions for hoisting articles China JBY Supply
In order to ensure the safety and reliability of the object in the process of hoisting, the binding method should be selected according to the weight, shape feature, installation requirement and hoisting method of the object before lifting. There are two main methods: (1)... read more
Specification for safe use of shackles China JBY Supply
Shackle,Eyebolt, Hoist hook,Wire rope are the main end fittings of sling rope and hanger. Whether they are used correctly or not is directly related to the load-bearing safety of hanger and hanger. The standard use of shackles can extend the service life of shackles and ensure... read more
The use and technical requirements of the hook China JBY Supply
1, the acquisition hook should be used by the technical documents of the manufacturer’s certificate and other technical documents; the important department procurement hook, such as the railway, the port and so on, the hook out of the factory must be strictly inspected (inspection). ... read more