During the use of wire ropes, regular inspections must be carried out according to the regulations, and the inspection results shall be carefully recorded. By monitoring the wire rope at any time, it provides a basis for safe and reasonable use of wire rope. Application process inspection includes two parts: external inspection and internal inspection. 1. inspection site Strictly speaking, the performance of the wire rope begins to decrease after being put into use. Therefore, in the course of its use, all parts of the full-length should be inspected. It is difficult to inspect the whole wire rope objectively, but for those parts that have been proved to be easily damaged by practice, it must be checked frequently and carefully, because once the serious damage can not be found in time, it is likely to have disastrous consequences. After the wire rope is suddenly loaded, the wire rope entering and leaving the pulley and the rope slot should be examined carefully. As for the wire rope used for insertion, it can not be as regular as the normal twisting part, which directly affects the good contact between the wire rope and the matching groove, making it the most easily broken wire. External inspection of 2. wire rope (1) diameter checking is an extremely important parameter for wire ropes. By measuring the diameter, it can reflect the change speed of the diameter, the greater impact load of the wire rope, and the uniform tension of the rope when the rope is twisted, and whether the rope core has enough support to the rope. (2) wear detection is inevitable during the wearing process of wire ropes. Through the inspection of the wear of the wire rope, the contact condition of the wire rope and the matching wheel can be reflected, and the actual bearing capacity of the wire rope is speculated on the condition that the wear degree of the steel wire can not be tested at any time. (3) wire breaking inspection will definitely break down after the wire rope is put into use, especially in the later stage of application, the development speed of broken wire will increase rapidly. Since the wire rope is not possible to stop running in the course of use, it is not allowed to continue (although it is not allowed for the new wire rope), so it can not only speculate on the continuous bearing capacity of the wire rope, but also according to the appearance of the wire breaking examination, especially the inspection of the broken wire in a twist distance. The development speed of broken wire roots can indirectly predict the fatigue life of wire rope. (4) under the condition of lubrication inspection, most of the new steel wire rope has been lubricated in production, but in the process of use, the grease will be lost. In view of the fact that lubrication can not only protect the steel rope during transportation and storage, it can also reduce the friction between steel wire, rope and wire rope and the matching groove in the use of wire rope, so it is very useful for prolonging the service life of the wire rope, so that the damage of corrosion and friction to the wire rope is harmful. It is very necessary to reduce lubrication to the lowest level. Although sometimes the surface of a wire rope is not necessarily coated with lubricating oil (such as antifriction oil), the lubrication inspection is still very important from the view of anticorrosion and meeting the special needs.
Related Posts
Specification for safe use of shackles China JBY Supply
Shackle,Eyebolt, Hoist hook,Wire rope are the main end fittings of sling rope and hanger. Whether they are used correctly or not is directly related to the load-bearing safety of hanger and hanger. The standard use of shackles can extend the service life of shackles and ensure... read more
Marking method for the characteristics of steel wire rope China JBY Supply
The diameter of the wire rope is 18mm, the steel wire (no plating), 6 strand of natural fiber core, right twist twist , the tensile strength of the steel wire is 1770MPa, the minimum breaking tension of the steel wire is 176kN, and the... read more
Use method and waste standard of wire rope China JBY Supply
1. Wire rope suspender shall have product qualification certificate, technical data and instruction manual. Steel wire rope with no technical data and no product qualification certificate shall be prohibited. 2. Steel wire rope is strictly prohibited to overload. It is forbidden to use steel wire... read more
Basic requirements for anchor chain measurement China JBY Supply
The anchor chain (cable) is a chain between the anchor and the hull, which is used to transfer and buffer the external force of the ship. A part of the friction can also be produced. The requirements of the anchor chain measurement: 1.... read more
Turnbuckle common maintenance China JBY Supply
The rigging of a kind of rigging, such as open flower orchid and so on, can be done with the spraying method of twist strands if the surface is oiled, the open flower orchid factory is sometimes used for dip coating later. It means that... read more
Application and characteristics of wire rope clips China JBY Supply
The wire rope clamp is mainly used for temporary connection of the wire rope, the fixing of the back hand rope when the wire rope goes through the trolley set and the fixing of the wind rope head of the rope on the pick... read more
Performance characteristics and maintenance of die forging shackles China JBY Supply
Performance characteristics of die forging Shackles: 1. The unloading body is forged by high-quality carbon structure or alloy structure and stops heat treatment. It has small volume and high strength. 2. The experimental load of the shackle is 2 times the limit working load, and the... read more
Precautions for hoisting articles China JBY Supply
In order to ensure the safety and reliability of the object in the process of hoisting, the binding method should be selected according to the weight, shape feature, installation requirement and hoisting method of the object before lifting. There are two main methods: (1)... read more
Use and precautions of eye hoist hook China JBY Supply
The eye hoist hook should pay attention to the environmental conditions when it is used in conjunction with the rigging, and the rigging should not be twisted and knotted. During the lifting process of the hook, the articles that are strictly forbidden to be... read more