As a part of rigging, wire rope rigging plays a very important role in hoisting engineering. However, the wire rope can not be used casually, in the process of hoisting there are also a lot of things to pay attention to. Below, give you a brief introduction to the use of wire rope hoisting rigging. 1. When the rigging rigging with aluminum alloy is used for pressing joints, metal should not be subjected to radial force or bending moment. 2, objects such as metal pins and so on which are worn into soft objects should have enough connection strength, and the diameter should not be less than 2 times the nominal diameter of wire rope sling. 3. Wire rope rigging shall not be dragged on the ground; no rigging with welding scar shall be used; wire rope rigging shall not be used as the welding wire. 4. Hooks and shackles should not be welded or drilled. There should be no defects such as cracks, sharp angles and over burning. 5. The thickness of the lifting lug and other rigging fittings that are connected with the shackle pin shall not be less than the pin diameter. 6, when lifting the lifting weight, it should meet the following requirements: the possibility of the rigging without any buckle; the terminal connection method is correct and reliable; the bending radius of the rigging is more than 2 times the nominal diameter of the wire rope; in the use of the rigging, the natural forming of the knotting angle must not be squeezed, but the final eye, casing or insert connection and its accessories should be safe. All dependable; multi limb rigging must not be entangled with each other
Related Posts
Application and characteristics of wire rope clips China JBY Supply
The wire rope clamp is mainly used for temporary connection of the wire rope, the fixing of the back hand rope when the wire rope goes through the trolley set and the fixing of the wind rope head of the rope on the pick... read more
Turnbuckle common maintenance China JBY Supply
The rigging of a kind of rigging, such as open flower orchid and so on, can be done with the spraying method of twist strands if the surface is oiled, the open flower orchid factory is sometimes used for dip coating later. It means that... read more
General Requirements For Shackle China JBY Supply
1. Shackle should be smooth, cracks and other defects are not allowed, sharp edges, combustion. 2. Cast iron or cast iron shackles prohibited. The buckle can be made of steel forgings and axle pin bars processed after forging. 3. No drilling or welding repair . Permanent... read more
Precautions for hoisting articles China JBY Supply
In order to ensure the safety and reliability of the object in the process of hoisting, the binding method should be selected according to the weight, shape feature, installation requirement and hoisting method of the object before lifting. There are two main methods: (1)... read more
The use and technical requirements of the hook China JBY Supply
1, the acquisition hook should be used by the technical documents of the manufacturer’s certificate and other technical documents; the important department procurement hook, such as the railway, the port and so on, the hook out of the factory must be strictly inspected (inspection). ... read more
The standard of discarding the hook China JBY Supply
Criteria for scrapping hooks: The hooks should be inspected regularly. If one of the following conditions is found, the hooks must be scrapped and replaced. 1. When the surface has cracks and cracks, the opening is increased by 15%... read more
Rigging rust prevention China JBY Supply
Metal corrosion is a spontaneous process of metal transformation from high potential energy unit to compound. Sling gear is a hardware and mechanical tool. Without effective protective measures, corrosion will be inevitable. Therefore, the sling will face the problem of anti-rust in the process... read more
How to use the Turnbuckle China JBY Supply
Turnbuckle is also known as a rigging, refers to the two ends of the right and left-handed thread to adjust the length of the connection of the connector fittings. If you don’t work hard, you can only inherit one of the trillions of OC-type... read more
Specification for safe use of shackles China JBY Supply
Shackle,Eyebolt, Hoist hook,Wire rope are the main end fittings of sling rope and hanger. Whether they are used correctly or not is directly related to the load-bearing safety of hanger and hanger. The standard use of shackles can extend the service life of shackles and ensure... read more
Performance characteristics and maintenance of die forging shackles China JBY Supply
Performance characteristics of die forging Shackles: 1. The unloading body is forged by high-quality carbon structure or alloy structure and stops heat treatment. It has small volume and high strength. 2. The experimental load of the shackle is 2 times the limit working load, and the... read more